Neumann D-01 mono set - EU Large Diaphragm microphone

D-01 Specifications
Acoustic transducer: K 07 large double-diaphragm capsule,
diameter 30 mm with protected internal electrodes
Directional characteristic: 15 remote controllable polar patterns,
from omni to cardioid to figure-8

Frequency response: 20 Hz to 20 kHz
Free-field sensitivity1) 2): –44 dBFS
Equivalent noise level, CCIR3): 19 dB
Equivalent noise level, A-weighted3): 8 dB-A
Signal-to-noise ratio2), CCIR3): 75 dB
Signal-to-noise ratio2), A-weighted3): 86 dB
Maximum SPL at 0 dBFS: 138 dBSPL
Dynamic range, A-weighted3): 130 dB

Supply voltage range: +6 V to +10.5 V
Current consumption: max. 220 mA
Weight: approx. 700 g, Diameter: 63.5 mm, Length: 185 mm
General Specifications of the Solution-D microphones
Interface: AES42

Remote controlled functions:
- Polar pattern4)
- Low-cut: flat, 40, 80, 160 Hz
- Pre-attenuation: 0 , -6, -12, -18 dB
- Gain: 0...63 dB in 1 dB steps, clickless
- Testsignal: 1 kHz, pink noise, white noise
- Parametric compressor/limiter (incl. de-esser function)
- Independent peak limiter avoiding any clipping
- Switch functions: soft muting, phase reverse, signal lights
- Signal lights: red4) and blue LEDs
- System functions, firmware download

A/D conversion: Neumann process (patented),
28-bit internal word length

Digital signal processing: Fixed-point,
variable internal word length 28 bits to 60 bits

Synchronization:
- Asynchronous operation (free-running, AES42 - Mode 1),
basic frequency accuracy: ± 25 ppm
- Synchronous operation (AES42 - Mode 2),
pulling range: Min. ± 100 ppm

Power supply (phantom power complying with AES42)

Output: XLR3M, 24 bits as per AES/EBU (AES3)
________________________
All data with respekt to 0 dB pre-attenuation and 0 dB gain.
1) at 1 kHz
2) re 94 dBSPL
3) according to IEC 60268-1;
CCIR-weighting according to CCIR 468-3, quasi peak;
A-weighting according to IEC 61672-1, RMS
4) D-01 only